Unit 3 · Grades 6–8 · Dissolve, measure strength, separate
Solutions, Dissolving and Separation
Stir sugar into water and it seems to vanish. It has not. Did you know that a cup of sugar water weighs exactly as much as the water plus the sugar you put in? This unit explains where a dissolved substance goes, how to describe a weak or strong solution, and how chemists pull mixtures apart again with filter paper, evaporation and paper chromatography.
Your mission
- Explain what happens to a solute when it dissolves, and why its mass does not disappear.
- Use the words soluble and insoluble from what you observe.
- Compare solutions as dilute or concentrated, and recognize a saturated solution.
- Name three ways to make a solid dissolve faster.
- Choose filtration, evaporation or paper chromatography to fit a separation job.
No experiments are required, and none should be done at home. Do not heat, mix, taste or test household chemicals for this lesson. Classroom labs that heat solutions use school equipment with an adult in charge. At most, notice things already happening around you: sugar disappearing into a stirred drink, or sand settling to the bottom of a puddle.
Quick recap
In Compounds and Mixtures you met the solution: a mixture that looks the same all the way through. The substance that dissolves is the solute. The substance it dissolves into is the solvent. In salt water, salt is the solute and water is the solvent. This unit zooms in on how dissolving works and how to undo it.
What happens when something dissolves
A sugar crystal is made of a huge number of tiny particles packed together. When it dissolves, the sugar particles separate from the crystal and spread out among the water particles, as water particles move into the spaces between them. The crystal gets smaller until you cannot see it. The particles are now far too small to see, but they are still there. That is why sugar water still tastes sweet.
Because nothing is destroyed, mass is conserved. Royal Society of Chemistry teaching materials use this example: a beaker and water with a mass of 150 g, plus 10 g of salt, gives 160 g, both when the salt first sinks and after it can no longer be seen.
Dissolving is not melting. Melting happens to one substance when it warms up, like ice turning into liquid water. Dissolving needs two substances, a solute and a solvent, and it can happen at room temperature.
A solution is see-through, but see-through does not mean colorless. A solution can be colored, like blue copper sulfate solution, and still be clear enough to see through.
Soluble or insoluble?
A substance that dissolves in a solvent is soluble in it. A substance that does not dissolve is insoluble. These words always belong to a pair: a substance is soluble or insoluble in a particular solvent. Water dissolves many substances, but not all of them.
| Substance | What you see after stirring | Soluble in water? |
|---|---|---|
| Table salt | Crystals shrink and vanish; the liquid stays clear | Soluble |
| Sugar | Grains vanish; the liquid stays clear | Soluble |
| Sand | Water may look cloudy, then the grains settle to the bottom | Insoluble |
A cloudy liquid where tiny solid bits slowly settle is called a suspension. It is a mixture, but it is not a solution, because the solid never dissolved.
Concentration
Concentration tells you how much solute is dissolved in a certain amount of solution. A solution with only a little solute is dilute. A solution with a lot of solute in the same amount is concentrated.
Picture two glasses with the same amount of water. Dissolve one spoonful of sugar in the first and four spoonfuls in the second. The second glass is more concentrated: more solute in the same amount of solvent. You can make a solution more dilute by adding more solvent. The amount of solute stays the same, but it is spread through more liquid.
Chemists measure concentration with numbers and units. In this course, the words dilute and concentrated, used to compare, are enough.
Saturated solutions
Can you keep stirring sugar into water forever? No. At some point, extra sugar stays on the bottom no matter how long you stir. The solution now holds as much solute as it can at that temperature. It is a saturated solution. A solution that could still dissolve more solute is unsaturated.
How much can dissolve depends on the solute, the solvent and the temperature. For many solids, warmer water can hold more. Warm water dissolves much more sugar than cold water, but for table salt the difference is small.
Speeding up dissolving
Three changes make a solid dissolve faster:
- Stirring brings fresh solvent into contact with the solid.
- Smaller pieces expose more surface for the solvent to reach. Loose sugar grains dissolve faster than a sugar cube of the same mass.
- A warmer solvent has faster-moving particles that reach the solid more often and with more energy.
Watch the difference between how fast and how much. Stirring and crushing change only the speed; they do not let more solute dissolve in the end. Temperature is different: it changes the speed and, for many solids, how much can dissolve.
How do we know?
Scientists test one change at a time. To see whether stirring matters, they keep the water, the amount of sugar and the temperature the same, and stir only one cup. Changing two things at once would make it impossible to tell which change made the difference.
Filtration
Filtration separates pieces by size. Filter paper has very tiny holes. Water particles and dissolved particles pass through, but larger undissolved bits do not. The solid left on the paper is the residue. The liquid that passes through is the filtrate.
Filtration cannot remove a dissolved solute, because its particles are small enough to slip through with the water. You use filtration in the kitchen whenever you drain pasta in a colander. Drinking-water treatment plants use it too: water passes through filters made of materials such as sand, gravel or charcoal.
Evaporation
To get a dissolved solid back, remove the solvent. In evaporation, the solvent turns into a gas and leaves, and the solute stays behind. As the solvent leaves, the solution becomes more concentrated, then saturated, and solid starts to appear. If the solid forms slowly in a regular pattern, it makes crystals. That is called crystallization.
Evaporation is the right choice when you want the solid and do not need to keep the solvent, because the solvent escapes into the air.
Paper chromatography
Many inks and food colorings are mixtures of several dyes. Paper chromatography separates those dyes so you can see how many there are. The name joins chroma, meaning color, and graph, meaning to record.
- A start line is drawn in pencil near the bottom of the paper, and a small spot of ink goes on the line.
- The bottom edge of the paper stands in a little solvent, such as water. The solvent must sit below the start line, or the spot would just wash off into the solvent.
- The solvent soaks up the paper and carries the dyes with it. Each dye travels a different distance, depending on how well it dissolves in the solvent and how strongly it is attracted to the paper.
- The paper is taken out before the solvent reaches the top. The highest point the solvent reached is the solvent front. The finished paper is a chromatogram.
Why pencil? Pencil marks are not soluble in water, so the line stays put. A pen line could dissolve and run, adding its own colors to the result. The ink you test must be soluble in the solvent you use; if it is insoluble, the spot stays on the start line.
Reading the result: a sample that makes several spots is a mixture. Spots from two samples that travel the same distance in the same test are probably the same dye.
Choosing a method
Ask what is different about the parts you want to separate, then match the method to that difference.
| You want to… | Use | Because |
|---|---|---|
| Remove an insoluble solid from a liquid | Filtration | The solid bits are too big to pass through the paper |
| Get a dissolved solid back | Evaporation | The solvent leaves as a gas; the solute stays |
| Find how many dyes are in an ink | Paper chromatography | Different dyes travel different distances up the paper |
Worked example
A beaker holds water with sand in it and a blue dye dissolved in it. How could a lab team learn what is in it?
- Filter it. The sand stays on the paper as residue. The filtrate is a clear blue solution.
- Test a drop of the filtrate with paper chromatography. If the blue splits into two bands, the “blue dye” was really a mixture of two dyes.
- Evaporate the rest of the filtrate to recover the dissolved dye as a solid. The water is lost to the air.
Notice that one sample can need more than one method, in the right order.
Practice problems
Download the printable Solutions, Dissolving and Separation worksheet (PDF). It has thirteen problems that go from easier to harder, and none of them repeats the self-guided quiz.
Talk about it: when you add sugar to a drink, you cannot see it anymore. What evidence, without tasting or testing anything, would convince a friend that the sugar is still there?
Try the self-guided quiz at jugami.com/matter/solutions-and-separation/
Self-guided quiz
Choose one answer for each item. You will see why it fits or does not, and which section to reread. Nothing is sent or saved.
Score: 0 of 8 correct · 0 answered
Take it with you
When a solute dissolves, its particles spread through the solvent; nothing is lost, so mass is conserved. Soluble substances dissolve in a given solvent; insoluble ones do not. Concentration compares how much solute is in the solution, and a saturated solution holds all the solute it can at that temperature. Stirring, smaller pieces and warmth speed dissolving. Filtration removes undissolved solids, evaporation recovers dissolved ones, and paper chromatography shows how many dyes a mixture holds.
Sources
Scientific definitions and examples checked against these public references. Original text, diagram and share art created for Jugami; no source artwork copied.
- RSC Education: Mass and dissolving (11–14). Dissolved solute is still present; 150 g + 10 g salt gives 160 g
- RSC Education: Solutions, developing understanding (11–14). Soluble vs insoluble; suspensions settle
- RSC Education: Water sports and solutions. Dissolving is reversible; factors such as temperature and stirring; solutions can become saturated
- LibreTexts (CK-12), Rate of Dissolving. Surface area, stirring and temperature; rate vs amount
- OpenStax Chemistry 2e, 11.3 Solubility. Saturated, unsaturated, dilute and concentrated
- American Association of Chemistry Teachers: What's the Solution? Temperature affects sugar far more than table salt
- RSC Education: How to teach filtration, evaporation and crystallisation at 11–14. Residue, filtrate, saturated, crystals
- RSC Education: 5 ways to teach paper chromatography. Origin, solvent front, chromatogram; chroma and graph
- RSC Education: Let them get it wrong. Why the start line is pencil and sits above the solvent
- RSC Education: Paper chromatography practical (14–16). Stationary and mobile phase, solvent front; insoluble ink stays put
- CDC: How Water Treatment Works. Filtration through sand, gravel or charcoal